Waterproof electrical insulating tape Product feature:
1, Good form to irregular surface
2, Good consistency with several of cable
3, Self-melting tape
4, Wide temperature scope
5, excellent resistance to climatic and sealing performance
6, excellent adhesive ability to copper, aluminum and cable sheath material
Tel: 86-0371-63933960
Fax: 86-371-63933960-100
E-mail: [email protected]
Address: Jingbei 3rd Road, 110th, Economic -Technical Dev. Zone, Zhengzhou, Henan, China
waterproof electrical insulating tape Product presentation:
3M 2228# waterproof insulation tape is self-melting, good form electrical insulation and waterproofing sealant tape. Its belt base is ethylene-propylene rubber. Surface coated with sticky relay strong, good thermal stability good adhesive. It can be used in electrical insulation, waterproof and sealed and so on. Rated temperature 90°C, emergency overload temperature 130°C. Scotch 2228# tape provide waterproof sealed and fine ultraviolet protection to electrical circuits.
waterproof electrical insulating tape Product specification:
50.8mm (W)*3m (L)*1.65mm (D)/378.5g/roll; 50 rolls/0.042m³/carton
waterproof electrical insulating tape Product feature:
1, Good form to irregular surface
2, Good consistency with several of cable
3, Self-melting tape
4, Wide temperature scope
5, excellent resistance to climatic and sealing performance
6, excellent adhesive ability to copper, aluminum and cable sheath material
waterproof electrical insulating tape Applicable scope:
1, Used for waterproof for communication equipment such as base station, antenna, feeder double-quick
2, Aerial insulation wire connector waterproof seal protection
3, outside sheath of repair to cable connector and cable
4, Suitable for 1000 volts and the following main insulation recovery
5, Suitable for 1000 volts and below the insulation of the motor lead
6, below 35KV Lord Insulation of busbar row connection
7, Landlines waterproof seals
waterproof electrical insulating tape Technical parameters:
Mechanical capacity |
Typical value |
color |
black |
thickness |
1.65mm (ASTM D-4325) |
Tensile strength |
1.03N/mm (ASTM D-4325) |
Elongation at break |
1000% (ASTM D-4325) |
Flame retardance |
1sec Max(UL510) |
Dielectric temperature |
Dry 19.7KV/mm (ASTM D-4325) |
|
Wet 19.7KV/mm (ASTM D-4325) |
permittivity |
3.5 (ASTM D-4325) |
stickiness |
To copper sheet 26.2N/10mm |
|
To polyethylene 17.5N/10mm |
Melting point |
Class 1 through (ASTM D-4388) |
Dielectric loss |
1.00% (ASTM D-4325) |
temperature |
90°C (ASTM D-4388) |
water absorptivity |
0.15% (ASTM D-570) |
Hydrosphere searches rate |
0.1g/100n2/24hr (ASTM D-3833) |
Ozone resistance performance |
Pass (ASTM D-3833) |
heat resistance |
Pass 130°C (ASTM D-4388) |
Anti UV |
Pass (ASTM D-4388 |
We are a professional surge protection devices (SPD) company that mainly dealing in SPD, base station auxiliary material series etc.. We are ISO9001:2008 certified company, from 2007 to now, we are always cooperating with China Telecom the top brand of communication industry, and built base station for them. Being in this field for 8 years, we have successfully in China, currently we are looking forward to expand our export markets.
And we are distributor of 3M brand tape; our products have exported to Ecuador.
If you have any suggestions or opinions about our products,please leave a message,and we will immediately answer your questions. Thanks for your support.