TNC Coaxial Lightning Arrestor has superior performance to the BNC at microwave frequencies. This trait makes it suitable for most of the communication frequencies including VHF and UHF band.
Tel: 86-0371-63933960
Fax: 86-371-63933960-100
E-mail: [email protected]
Address: Jingbei 3rd Road, 110th, Economic -Technical Dev. Zone, Zhengzhou, Henan, China
★ TNC Type Coaxial Lightning Arrestor Introduction
The TNC connector is a threaded, upgraded version of the BNC connector. TNC type Coaxial Lightning Arrestor are often seen on civil devices that uses VHF / UHF frequency such as radio broadcasting transmitter or GPS receiver, or on military communication system. TNC coaxial lightning arrestor is a flexible product. All TNC type Coaxial Lightning Arrestors are customizable.
★ TNC Type Coaxial Lightning Arrestor Features
Very wide frequency range (Up to 6 GHz)
Very low insertion loss; low VSWR
Instant Response (λ/4 type, up to 0.1 ns)
Adopt quality gas discharge tube to ensure high discharge capability
Low residual voltage; high endurance
Effective protection for VHF / UHF band electronic devices
★ TNC Type Coaxial Lightning Arrestor Work Principle
Gas Discharge Tube (GDT)
GDT is an electronic device that can short high-voltage lightning surge to ground while letting the normal current pass. The most common TNC type Coaxial Lightning Arrestor is the GDT type. This is because the working frequency of TNC connector varies greatly, and GDT RF frequency arrester can work at almost all frequencies.
λ/4 (Quarter Wave) Shorting Stub
For some special equipment uses TNC connector that works at 1GHz or up, the λ/4 shorting stub become a technically available option. However, due to the relatively small size of TNC, the λ/4 shorting stub is not common.
★ TNC Type Coaxial Lightning Arrestor Parameters
Connector type: N-M/F; 7/16-MF; TNC-MF
Frequency range: 0.8~1.0/1.7~1.9 GHz
Impedance: 50 ohm
Imax: 50kA @8/20us
Residual voltage: ≤10V (1kV/us)
Insertion loss: ≤0.2dB
VSWR: ≤1.15
Response time: 0.1ns (λ/4 wave) / 50 ns (GDT)
* The actual specs are tentative and subject to change. Please contact [email protected] for latest product information and individualized product solution.
★ Why Choose TNC Type Coaxial Lightning Arrestor From Sanyuan
◆ All TNC Type Coaxial Lightning Arrestors made by Sanyuan enjoy a discounted customized service. GDT / λ/4 wave, product specification, materials are all available for our customers to choose from.
◆ Sanyuan TNC Coaxial Lightning Arrestor passed IEC 8/20 µs surge test, and meet major industrial qualification standards.
◆ Sanyuan has strong hold of the industry chain. The company has large supply ability and excellent quality control management.
◆ All Sanyuan TNC Coaxial Lightning Arrestors have an extended 3-year free technical support. If you have any question concerning our lightning protectors, you are more than welcome to contact us.
If you have any suggestions or opinions about our products,please leave a message,and we will immediately answer your questions. Thanks for your support.