*Why Buy RF/Coax Surge Protector?

The rf/coax surge protector is an indispensable device for electronic equipment lightning protection. The role of the rf/coax surge protector is limiting the transient over-voltage that flowed into the power line and signal transmission line, so that the equipment or system can withstand the voltage range. Or, it will be a powerful conductor flowed the lightning current into the ground, to protecting the protected equipment or systems from shock damage.

*Superiority of RF/Coax Surge Protector Manufactured by Sanyuan Group

√Extensive flow capacity. It can carry high voltage current.

√Built-in fast semiconductor protection device, fast response, low residual voltage. It can protect the electronic equipment, and no longer be suffering from the high-voltage current damage.

√Low insertion loss. It reduces the information loss in transformation.

√Small standing wave coefficient and wide operating frequency range wide. It can protect the electronic equipment of the large engine room stably.

√Superior performance. In the qualified use range of surge protector, there is an extremely small possibility that the product cannot operate normally. Besides, Sanyuan is a company with 13 years of experience in the electronic communications industry, you can totally trust us.

*Types of RF/Coax Surge Protector

1.    Coax surge protector

The coax surge protector is to prevent damage to the antenna and transceiver equipment due to feeder over-voltage induced lightning. It applies to satellite wireless communications, mobile base stations, microwave communications, radio and television coaxial antenna system, such as signal surge protection, installed in the mine partition LPZ0A-1 and follow-up partition.

2.    TV surge protector

The TV surge protector is mainly used for point-to-point co-occurrence protection of video signal equipment. It can protect all kinds of video transmission equipment from the damage of lightning and surge voltage.

3.    Antenna surge protector

Lightning damage to the wire is very strong, the antenna installed in the roof or commanding height, can easily receive the signal at the same time, it also brings a direct lightning strike hazards. The antenna protector is to protect antenna from lightning stroke. It set up lightning strip on the roof parapet of buildings, and use ground connector flowed lightning into the ground.

4.    Gas discharge tub surge protector (GDT)

The gas surge protector is an inside series gap in the middle of the arc-extinguishing tube, and the external series gap separate the tube from power grid. Through this way, it can prohibit the thunder damage.

*Surge Protector Structure

Copper materials with metal tube in normal situation.

*Choose The Right Surge Arrestor Model for Your Lightning Protection